Auto door, window, lifting equipment, entrance access, up and down controller, alarm system industrial control and security etc.
The switch can compatible 2262 /2260/1527/2240 etc chip and several code wireless remote control. So it can meet someone need of choosing the wireless remote control as they like to work with it .
Output working way:
1. Self-lock ---connect the JP1 with the cutting out cap.
2. Jog---the cutting-out cap is non-occupation, JP1 and JP2 do not connect either.
3.inter-lock---- Connect the Jp2 with the Cutting out cap,
Jog---- press one button is ON . loosen your finger on the same button is OFF .need one channel switch and one buttons remote control )
Self -lock----- press one button for one time is ON .press the same button again is OFF .need one channel switch and one buttons remote control
Inter-lock-------press one button is ON , press another button is OFF . (need one channel switch and 2 buttons remote control
Please notice that .here is the 2CH receiver and 2 buttons transmitter, you just can choose the the output way is self-lock or jog or inter-lock
Learning and remove method
1. press the learning code .the indicator flash ,loosen your finger ,press any button of the remote control ,the indicator flash 2 times and off .it mean you learn it successfully .
2. it can learn more than 12 PCS 2262 or 1527 chip with the different code wireless remote control
3. remove/clean :press the learning button about 8 seconds , the indicator turn on to off , it means the information that you keep have been removed successfully .
Technique Data
1.working voltage :DC12V
4.receiver sensitivity : more than -105dBm
5.working frequency :315/433MHz
here is in set ,we have made it work together .so you do not have to care about what frequency are they .
6.output voltage:DC and AC is optional
7.output current : less than 3A
8.max load current:10A
9.72mm*52mm*26mm
|