Why do you need to go to your devices for data collection, for device configuration or to monitor and control them, if it can be easily done over the internet using Teltonika WirelessCom/G10. Simply connect Teltonika WirelessCom/G10 to your remote device via RS232 interface and configure WirelessCom/G10 to connect to your server. Whenever some data arrives from your machine to the serial port, WirelessCom/G10 will connect to the configured server and make data transfer. Upon connection you can even send commands to your machine/device from your PC remotely. WirelessCom/G10 will thus transmit all the data coming on its serial port to GPRS and all the data coming from GPRS to serial port. In short it is acting as a bridge between GPRS and the serial port.

In addition to GPRS you can also use CSD connection and reach your remote devices just by dialing into the SIM number of WirelessCom/G10. WirelessCom/G10 also supports SMS bearer. Using SMS you can remotely configure the settings of WirelessCom/G10. 

The device can act as a master, and initiate the connection to the server or it can act as a slave and wait for incoming connection.

All in all Teltonika WirelessCom/G10 provides a cost-effective wireless solution of controlling your remote devices which have RS232 interface. No matter how far you are, you can always stay connected with your devices.   

Features:

Provides transparent GPRS/CSD connection
Receive SMS alerts when exceptions occur in device
No drivers required, hence works with any device/machine/equipment/computer
Simple and informative configuration menu
Configurable through any terminal software
Hardware reset from DTR pin (optional)
Device is remotely configurable through GPRS/CSD/SMS
Access only through authorized phone numbers (for CSD and SMS)
Up to 5 configurable authorized phone numbers
Auto PIN feature, no need to enter SIM card PIN after restart
Password protected configuration
Dual colour LED indication for various states of device (Up to 9 states)
Supports various data formats (8N1,8N2,8E1,8O1,7E1,7O1)
Firmware update possibility
CHAP/PAP authentication supported
CE certified
Technical specifications:

GSM:

Quad band: 850/900/1800/1900 MHz

GPRS Class 10: 16-24 Kbps upload, 32-48 Kbps download

CSD: Up to 9.6 Kbps

SMS: Text mode

RS232 interface:

Socket: DB9 female

Data rate: Up to 115200

Data bits: 7,8

Parity: Odd, Even

Flow control: No

Physical:

DB9 Female connector for connecting to a PC (or other device).

SIM card holder.

3.5 mm /1.35 mm power supply connector.

Latest Versions:

- WirelessCom_G10 Quick start guide 1.0.0
- WirelessCom_G10 User manual 4.0.1
- WirelessCom_G10 Firmware 2.3.0

Features coming up:

- Clock functionality (24hour clock), configure WirelessCom/G10 to connect to your server at a preconfigured time.

- WirelessCom/G10 utility tool, a PC-side all-in-one software which would include (in the order of priority),

WirelessCom/G10 configurator
WirelessCom/G10 firmware flasher
Simple terminal software
Tcp-serial-tcp software
Virtual serial port software
 

* The specifications presented in this flyer are subject to change without prior notice. Maximum data speeds mentioned in the flyer, depend on the services provided by your GSM operator.